|
|
|
|
"DRY-IT-OUT" DAMP REMOVER
DRY-IT-OUT is a technically advanced damp removal system, which will effectively dry out any wet porous building material. Normal damp proofing materials are effective only on dry surfaces however DRY-IT-OUT uses a special formulation which locates and removes water from the pores of the substrate.
|
|
|
|
|
DRY-IT-OUT applied to half of a damp paving slab shows how the water is displaced |
After one application of DRY-IT-OUT substrates are completely dry and sealed against further water penetration. One coat will form a virtually invisible protection to most surfaces however two coats may produce a slight sheen.
DRY-IT-OUT is economical to use and permanent. Use it on any porous building material, indoors or out: brick, stone, concrete, blockwork, paving slabs, plaster, gypsum, hardboard, MDF and wood.
DRY-IT-OUT comes in 7.5 litre kits, sufficient for over 100 m2 (one coat).
Apply by pump-up sprayer, roller or brush. For spraying, the Castleseal ''Sure Shot'' sprayer is recommended.
After curing, DRY-IT-OUT is a fully weatherproof system however treated surfaces may also be rendered, over-plastered, wallpapered or painted with any conventional paint.
|
TRY-IT-OUT & DRY-IT-OUT! |
|
|
|
|
|
VISITOR NUMBER
